Lexus IS250 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL AUDIO TERMINAL

  1. E123219E01
    Engage the 2 claws and install the audio terminal.

  1. Connect the connector clamp.


2. INSTALL CONSOLE BOX

  1. B123342
    Engage the 2 claws and 2 clips.

  1. B116791
    Install the 2 bolts <C>.

  1. B123339
    Install the 2 bolts <C>.

  1. Connect the connector.

  1. B123341E01
    Connect the connectors.

  1. Engage the 2 clamps.

  1. Install the 2 bolts <C>.


3. INSTALL CONSOLE BOX REGISTER ASSEMBLY

  1. B123605
    Engage the 2 claws and 4 clips, and then install the console box register assembly.

  1. Install the rear ash receptacle assembly.


4. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY

  1. B116700E01
    Connect the connectors.

  1. Insert the protruding parts of the front ash receptacle sub-assembly into the 2 guide holes as shown in the illustration.

  1. B116698
    Install the front ash receptacle sub-assembly with the 2 screws <F>.


5. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

  1. B123400
    Engage the 6 clips.

  1. B123395
    Close the snap.


6. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

  1. B123398
    Engage the 7 claws and 2 clips.

  1. B123396
    Close the snap.


7. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

  1. B123386
    Connect the connectors.

  1. Engage the 8 clips and install the console panel sub-assembly.


8. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)

  1. B123388
    Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.


9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)

  1. B123387
    Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.


10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
← REMOVALCOMPONENTS →