Lexus IS250 · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE VISOR BRACKET COVER

  1. B125395
    Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.

    HINT:
    Use the same procedure to remove the cover on the other side.


2. REMOVE VISOR ASSEMBLY

  1. B125396
    Remove the 2 screws and visor assembly LH.


3. REMOVE VANITY LIGHT ASSEMBLY

  1. B126815E01
    Disengage the claw <A> and separate the bulb holder from the vanity light, as shown in the illustration.

  1. Disengage the claw <B> and remove the vanity light assembly.

    HINT:
    Use the same procedure to remove the light on the other side.

← COMPONENTSINSTALLATION →