Lexus IS250 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL GLOVE BOX LIGHT ASSEMBLY

  1. E123581
    Install the glove box light assembly.


2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

  1. B123356
    Connect the connectors.

  1. Engage the 2 claws.

  1. Install the glove compartment door assembly with the 5 screws.


3. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY

  1. C122442
    Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Install the front passenger side knee airbag assembly with the 3 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }


4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B123382
    Engage the 4 clips and install the No. 2 instrument panel under cover sub-assembly.


5. INSTALL SIDE INSTRUMENT PANEL RH

  1. B123380
    Engage the 5 claws and 3 clips, and then install the side instrument panel RH.


6. INSTALL FRONT DOOR OPENING TRIM COVER RH

  1. B123353
    Engage the 6 claws and install the front door opening trim cover RH.


7. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)

8. INSTALL FRONT DOOR SCUFF PLATE RH (w/ Illumination)

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. PERFORM INITIALIZATION
Some systems need initialization after reconnecting the cable to the negative battery terminal (Click here).

11. INSPECT SRS WARNING LIGHT
(Click here)
← INSPECTIONCOMPONENTS →