63-41
Diagnostic trouble codes
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 63-41 |
An unsuitable disc is inserted. |
|
| 63-42 |
The disc cannot be read. |
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. CHECK DISC |
Check that the disc is not deformed or cracked.

- OK:
- No deformation or cracks on the disc.
|
|
||||
| OK | |
| 2. CLEAN DISC |
Disc cleaning

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction
- NOTICE:
- Do not use conventional record cleaner or anti-static preservative.
| NEXT | |
| 3. CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 4. RECHECK DTC |
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| NG | |
| 5. REPLACE DISC |
Replace the disc with another and recheck.
Replace the disc with another normal one.
Clear the DTCs (Click here).
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
