Lexus IS250 · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH

  1. B129216
    Engage the 2 claws and install the luggage compartment door opener main switch.


2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

  1. B123356
    Connect the connectors.

  1. Engage the 2 claws.

  1. Install the glove compartment door assembly with the 5 screws.


3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

  1. C122442
    Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Install the front passenger side knee airbag assembly with the 3 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }


4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. B123382
    Engage the 4 clips and install the No. 2 instrument panel under cover sub-assembly.


5. INSTALL SIDE INSTRUMENT PANEL RH

  1. B123380
    Engage the 5 claws and 3 clips, and then install the side instrument panel RH.


6. INSTALL FRONT DOOR OPENING TRIM COVER RH

  1. B123353
    Engage the 6 claws and install the front door opening trim cover RH.


7. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)

8. INSTALL FRONT DOOR SCUFF PLATE RH (w/ Illumination)

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal (Click here).


11. INSPECT SRS WARNING LIGHT
(Click here)
← INSPECTIONCOMPONENTS →