Lexus IS250 · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection


INSPECT LICENSE PLATE LIGHT ASSEMBLY

  1. E119965E01
    Disconnect the connector from the license plate light.

  1. Measure the voltage of the connector.

    Standard voltage:
    LH Side:
    Tester Connection
    		 Condition
    		 Specified Condition
    Q47-1 (B) - Q47-2 (E)
    		 Dimmer switch ON
    		 10 to 14 V
    Q47-1 (B) - Q47-2 (E)
    		 Dimmer switch OFF
    		 Below 1 V
    RH Side:
    Tester Connection
    		 Condition
    		 Specified Condition
    Q44-1 (B) - Q44-2 (E)
    		 Dimmer switch ON
    		 10 to 14 V
    Q44-1 (B) - Q44-2 (E)
    		 Dimmer switch OFF
    		 Below 1 V

    If the result is not as specified, repair or replace wire harness or connector.

← COMPONENTSREMOVAL →