Lexus IS250 · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection


INSPECT CLUTCH SWITCH ASSEMBLY

  1. E113308E02
    Remove the clutch switch.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 
    Tester Connection
    		 Condition
    		 Specified Condition
    1 - 2
    		 Switch pin free (Clutch pedal depressed)
    		 10 kΩ or higher

    		Switch pin pushed in (Clutch pedal released)
    		 Below 1Ω
    If the result is not as specified, replace the clutch switch.

← REMOVALINSTALLATION →