SERVICE DATA
Specifications
| Starter assembly |
Rated voltage and output power |
12 V 1.7 kW |
|
| Specified current |
90 A or less at 11.5 V |
||
| Starter armature assembly |
Standard length |
3.1 mm (0.122 in.) |
|
| Maximum length |
3.8 mm (0.150 in.) |
||
| Brush length |
Standard length |
9.0 mm (0.354 in.) |
|
| Minimum length |
4.0 mm (0.158 in.) |
||
| Starter relay |
Specified condition |
1 - 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
||
| Starter cut relay |
Specified condition |
1 - 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
||
| Engine switch |
Resistance |
Pushed: 7 (SS1) - 5 (GND) |
Below 1 Ω |
| Pushed: 2 (SS2) - 5 (GND) | |||
| Not pushed: 7 (SS1) - 5 (GND) |
10 kΩ or higher |
||
| Not pushed: 2 (SS2) - 5 (GND) | |||