SERVICE DATA
Specifications
| Front wheel alignment |
Vehicle height |
||
| normal suspension | |||
| 16 in. wheel |
Front: A-B Rear: C |
111mm (4.37 in.) 212 mm (8.35 in.) |
|
| 17 in. wheel |
Front: A-B Rear: C |
111mm (4.37 in.) 214 mm (8.43 in.) |
|
| 18 in. wheel |
Front: A-B Rear: C |
111 mm (4.37 in.) 220 mm (8.66 in.) |
|
| Sports suspension | |||
| 18 in. wheel |
Front: A-B Rear: C |
121 mm (4.76 in.) 220 mm (8.66 in.) |
|
| Toe-in (total) |
1.0+-2 mm (0.04+-0.08 in.) |
||
| Wheel angle | |||
| Normal suspension |
Inside wheel Outside wheel: Reference |
41°34'+-2° (41.57°+-2°) 36°10' (36.17°) |
|
| sports suspension |
Inside wheel Outside wheel: Reference |
41°26' +-2°(41.43°+-2°) 35°56' (35.93°) |
|
| Camber |
Sports suspension |
-0°36' +- 45' (-0.6+-0.75°) |
|
| Normal suspension |
-0°23' 45'+- (-0.38°+-0.75°) |
||
| Right-left error |
30' (0.5°) or less |
||
| Caster |
Sports suspension 18 in. wheel |
8°04'+-45' (8.07+-0.75°) |
|
| Normal suspension 16 in. wheel |
8°07'+-45' (8.12+-0.75°) |
||
| Normal suspension 17 in. wheel |
8°11'+-45' (8.18+-0.75°) |
||
| Normal suspension 18 in. wheel |
8°04'+-45' (8.07+-0.75°) |
||
| Right-left error |
30° (0.5°) or less |
||
| Steering axis inclination |
Sports suspension |
10°55°+-45' (10.92°+-0.75°) |
|
| Normal suspension |
10°41'+-45' (10.68°+-0.75°) |
||
| Right-left error |
30° (0.5°) or less |
||
| Front suspension |
Lower ball joint turning torque |
0.5 to 0.6 N*m (5.1 to 61 kgf*cm, 4.4 to 53 in.*ibf) |
|
| Stabilizer bar link ball joint turning torque |
0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17.3 in.*ibf) |
||
- A: Ground clearance of front wheel center
- B: Ground clearance of front center position of front suspension lower arm front bush installation bolt head.
- C: Ground clearance of rear center position of rear No.2 lower arm bush installation bolt screw thread.
Rear wheel alignment
Toe-in (total)
3+-2 mm (0.12+-0.08 in.)
Camber
Sports suspension
-1°14' +- 45 (-1.23°+-0.75°)
Normal suspension
-1°14+-45' (-1.23°+-0.75°)
Right-left error
30° (0.5°) or less
Rear Suspension
Stabilizer link ball joint turning torque
2.45 N*m (25 kgf*cm, 1.8 ft*lbf) or less