TORQUE SPECIFICATIONS
Specifications
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| AIR CONDITIONING UNIT |
|||
| Air conditioning radiator assembly x Blower assembly |
3.0 |
31 |
27 in.*lbf |
| Air conditioning unit assembly x Body |
9.8 |
100 |
7 |
| Instrument panel reinforcement assembly x Body (Collar) |
6.0 |
61 |
53 in.*lbf |
| Instrument panel reinforcement assembly x Body ("Torx" bolt) |
20 |
204 |
15 |
| Air conditioning tube assembly x Cooler expansion valve |
3.5 |
35 |
30 in.*lbf |
| Suction pipe sub-assembly x Air conditioning tube assembly |
9.8 |
100 |
7 |
| BLOWER UNIT |
|||
| Air conditioning radiator assembly x Blower assembly |
3.0 |
31 |
27 in.*lbf |
| Blower assembly x Instrument panel reinforcement assembly (Bolt:) |
9.8 |
100 |
7 |
| No,2 Air duct x Blower assembly |
5.4 |
55 |
48 in.*lbf |
| COMPRESSOR AND MAGNETIC CLUTCH |
|||
| Compressor and magnetic clutch x Engine |
25 |
255 |
18 |
| Discharge hose sub-assembly x Compressor and magnetic clutch |
9.8 |
100 |
7 |
| No. 1 cooler refrigerant suction hose x Compressor and magnetic clutch |
9.8 |
100 |
7 |
| Magnet clutch hub x Cooler compressor assembly |
18 |
184 |
13 |
| Oil filter bracket sub-assembly |
21 |
214 |
15 |
| Compressor and magnetic clutch (stud bolt) x Engine |
10 |
102 |
7 |
| CONDENSER |
|||
| Cooler condenser assembly x Radiator assembly |
5.0 |
51 |
44 in.*lbf |
| Discharge hose sub-assembly x Cooler condenser assembly |
5.4 |
55 |
47 in.*lbf |
| Liquid tube sub-assembly x Cooler condenser assembly |
5.4 |
55 |
47 in.*lbf |
| Cap x cooler condenser assembly |
2.9 |
30 |
26 in.*lbf |
| SMOG VENTILATION SENSOR |
|||
| Smog ventilation sensor |
9.8 |
100 |
7 |
| HEATER GLOW PLUG |
|||
| Water by-pass glow plug x Water hose joint |
15 |
157 |
11 |
| Heater blower wire x Water by-pass glow plug |
2.7 |
28 |
24 in.*lbf |
| WATER HOSE JOINT |
|||
| Water hose joint x Intake air surge tank |
10 |
102 |
7 |