Read its instruction books before using the tester.
Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
When driving the vehicle for testing purposes using the tester, 2 persons are required. One is for driving the vehicle, and the other operates the tester.
ПРИМЕЧАНИЕ:
ИНИЦИАЛИЗАЦИЯ ЭЛЕКТРОННОЙ СИСТЕМЫ
When disconnecting the battery terminal, initialize the following system after the terminal is reconnected.
Perform the RESET MEMORY (AT initialization) operation after replacing the automatic transmission assembly, engine assembly or ECM (see page Нажмите здесь).
УКАЗАНИЕ:
RESET MEMORY cannot be completed by only disconnection of the battery terminal.