САПУН > УСТАНОВКА

для подготовки Нажмите здесь



1. INSTALL VENTILATION VALVE


A157338E01

  1. Install the ventilation valve.

    Момент затяжки: 
    5.0 Н*м{ 51 кгс*см , 44 фунт-сила-дюймов }

    УКАЗАНИЕ:
    1. When reusing the ventilation valve, inspect the O-ring.
    2. If the O-ring has scratches or cuts, replace the ventilation valve.



2. INSTALL VENTILATION HOSE


A148346

  1. Install the ventilation hose to the ventilation valve.



3. INSTALL INTAKE MANIFOLD

  1. Install the intake manifold (see page Нажмите здесь).



4. PERFORM INITIALIZATION

  1. Perform initialization (see page Нажмите здесь).

    ПРИМЕЧАНИЕ:
    Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.