РЕЗИСТОР ТОПЛИВНОГО НАСОСА > СНЯТИЕ

для подготовки Нажмите здесь



1. REMOVE COWL TOP VENTILATOR LOUVER RH


E139771

  1. Remove the 6 clips and cowl top ventilator louver RH.



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

ПРЕДОСТЕРЕЖЕНИЕ:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



3. REMOVE ENGINE ROOM SIDE COVER LH


    A149481

  1. Remove the 4 clips and engine room side cover.



4. REMOVE FUEL PUMP RESISTOR


A148913

  1. Disconnect the connector from the resistor.

  1. Remove the bolt and resistor.