СИСТЕМА ПОСАДКИ И ЗАПУСКА > ПРОВЕРКА / СБРОС КОДОВ DTC

для подготовки Нажмите здесь



CHECK DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus:
    Select: Body / (desired system) / DTC /

  5. Read the DTCs.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus:
    Select: Body / (desired system) / DTC /

  5. Erase the DTCs.