ЭЛЕКТРОДВИГАТЕЛЬ ВЕНТИЛЯТОРА СИСТЕМЫ ОХЛАЖДЕНИЯ > ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

для подготовки Нажмите здесь



1. CHECK NO. 1 COOLING FAN MOTOR


A148567E02

  1. Disconnect the cooling fan motor.

  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    14.1 to 18.1 A at 20°C (68°F)

    If the result is not as specified, replace the No. 1 cooling fan motor.



2. CHECK NO. 2 COOLING FAN MOTOR


A148568E04

  1. Disconnect the cooling fan motor.

  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    14.1 to 18.1 A at 20°C (68°F)

    If the result is not as specified, replace the No. 2 cooling fan motor.