ГИДРАВЛИЧЕСКИЙ КЛАПАН ИЗМЕНЕНИЯ ФАЗ > ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

для подготовки Нажмите здесь



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG).

  1. Push the intelligent tester main switch ON.

  1. Start and warm up the engine.

  1. Idle the engine.

  1. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).

  1. Check the engine speed while operating the Oil Control Valve (OCV) using the tester.

    Specified condition:
    Tester Operation
    		Specified Condition
    0%
    		Normal engine speed
    30%
    		Engine idles roughly

    If the result is not as specified, check the oil control valve, wirings and camshaft timing exhaust gear.