ДАТЧИК ПОЛОЖЕНИЯРАСПРЕДВАЛА > УСТАНОВКА

для подготовки Нажмите здесь



1. INSTALL CAMSHAFT POSITION SENSOR


A149401

  1. Install the camshaft position sensor with the bolt.

    Момент затяжки: 
    10 Н*м{ 102 кгс*см , 7 фунт-сила-футов }

  1. Connect the camshaft position sensor connector.



2. INSTALL V-BANK COVER SUB-ASSEMBLY


A148820E01

  1. After sliding the cover from the vehicle front to the rear to attaching the 2 clips A, attach the 4 clips B and install the V bank cover.

    ПРИМЕЧАНИЕ:
    1. Make sure the clips are attached securely.
    2. Attaching the clips forcefully or hitting the top of the clips may damage them.