ПЕДАЛЬ АКСЕЛЕРАТОРА > СНЯТИЕ

для подготовки Нажмите здесь



1. REMOVE COWL TOP VENTILATOR LOUVER RH


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

ПРЕДОСТЕРЕЖЕНИЕ:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



3. REMOVE ACCELERATOR PEDAL


A160094

  1. Disconnect the accelerator pedal sensor connector.

  1. Remove the 3 nuts and accelerator pedal.

    ПРИМЕЧАНИЕ:
    1. Avoid physical shocks to the accelerator pedal.
    2. Do not disassemble the accelerator pedal assembly.