КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ > ПРОВЕРКА

для подготовки Нажмите здесь



1. INSPECT THROTTLE BODY

  1. Check that the throttle valve opens and closes smoothly.

  1. Check that the there is no sludge accumulating around the throttle body.



    A149908E01

  1. Measure the resistance between the terminals.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 (M-) - 2 (M+)
    		20°C (68°F)
    		0.3 to 100 Ω
    3 (E2) - 5 (VC)
    		20°C (68°F)
    		1.2 to 3.2 Ω

    If the result is not as specified, replace the throttle body.