ПОДОГРЕВАЕМЫЙ КИСЛОРОДНЫЙ ДАТЧИК (датчик 2) > ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

для подготовки Нажмите здесь



1. INSPECT HEATED OXYGEN SENSOR


A159234E01

  1. Disconnect the heated oxygen sensor connector.

  1. Measure the heater resistance between terminals 1 (HT) and 2 (+B) of the sensor.

    Standard resistance:
    11 to 16 Ω at 20°C (68°F)

    If the result is not as specified, replace the sensor.