|
All the motors do not function when operating manually.
|
1. There is an object that blocks the infrared signal under the seat.
|
-
|
|
2. Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's power seat control switch.
|
|
|
3. Power seat control ECU power source circuit
|
|
|
4. Power seat power source circuit
|
|
|
5. Power seat control switch circuit
|
|
|
6. Power seat control ECU and driver's power seat control switch
|
|
|
All the motors do not function by manual operation (except for slide operation).
|
1. There is an object that blocks the infrared signal under the seat.
|
-
|
|
2. Affected by the parts installed later (ornamental neon tube).
|
-
|
|
3. Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's power seat control switch.
|
|
|
4. Power seat control ECU and driver's power seat control switch.
|
|
|
One function does not operate by manual operation only.
|
1. Power seat motor circuit
|
|
|
2. Power seat control ECU
|
|
|
The movement is intermittent (all the motors) when operating manually.
|
1. Power seat control ECU power source circuit
|
|
|
2. Power seat power source circuit
|
|
|
3. Power seat control switch circuit
|
|
|
4. Power seat control ECU and driver's power seat control switch
|
|
|
The movement is intermittent (all the motors except for slide operation) when operating manually.
|
1. Affected by the parts installed later (remote controller using infrared signal).
|
-
|
|
2. Power seat control ECU and driver's power seat control switch
|
|
|
The movement is intermittent (a part of motors) when operating manually.
|
1. Position sensor power source circuit
|
|
|
2. Position sensor circuit
|
|
|
3. Power seat motor circuit
|
|
|
4. Power seat control ECU and driver's power seat control switch
|
|
|
The movement is different from the switch operation when operating manually.
|
1. There is an object that blocks the infrared signal under the seat.
|
-
|
|
2. Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's power seat control switch.
|
|
|
3. Power seat control ECU and driver's power seat control switch
|
|
|
Motors move without any switch operation.
|
1. Driver's power seat control switch
|
|
|
2. Power seat control ECU
|
|
|
The motors do not stop during manual operation.
|
1. There is an object that blocks the infrared signal under the seat.
|
-
|
|
2. Switch knob
|
-
|
|
3. Driver's power seat control switch
|
|
|
4. Power seat control ECU
|
|
|
Return function does not operate or operates a little, then stops (all return functions).
|
1. Power seat control ECU power source circuit
|
|
|
2. Power seat power source circuit
|
|
|
3. Ignition switch circuit
|
|
|
4. Position sensor power source circuit
|
|
|
5. Position sensor circuit
|
|
|
6. Driving position memory switch circuit
|
|
|
7. Power seat control ECU
|
|
|
8. Body ECU (Main)
|
-
|
|
Driving position memory system does not operate.
|
1. Driving position memory switch circuit
|
|
|
2. Power seat control ECU
|
|
|
3. Body ECU (Main)
|
-
|