| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM000000V29005X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE COOLING: THERMOSTAT: INSTALLATION; 2006 MY LX470 [05/2005 - ] | ||
INSTALLATION
1. INSTALL THERMOSTAT
(a) Install a new gasket to the thermostat.
|
(b) Insert the thermostat into the water inlet housing with the jiggle valve facing straight upward. HINT: The jiggle valve may be set within 30°of either side of the prescribed position. |
|
2. INSTALL WATER INLET
(a) Install the water inlet with the 3 nuts.
Torque:
19 N·m {194 kgf·cm, 14ft·lbf}
3.
ADD ENGINE COOLANT
![2006 MY LX470 [05/2005 - ]; 2UZ-FE COOLING: COOLANT: REPLACEMENT+](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; 2UZ-FE COOLING: COOLANT: REPLACEMENT+")
4. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
5.
INSTALL NO .1 ENGINE UNDER COVER
|
|