|
2. CHECK FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a)
Perform a diagnostic system check
.
(b) With the front seat airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat airbag with a new one:
-
Cuts, minute cracks or marked discoloration on the front seat airbag.
-
Cracks or other damage to the wire harness or connector.
CAUTION:
For removal and installation procedures of the front seat airbag, be sure to follow the correct procedure.
|