Last Modified: 4-30-2014 6.6 G Doc ID: RM000000W6Q006X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: 2UZ-FE ENGINE MECHANICAL: DRIVE BELT: INSPECTION; 2006 MY LX470 [05/2005 -        ]

INSPECTION

1. INSPECT DRIVE BELT

(a) Visually check the belt for excessive wear, frayed cords, etc.

HINT:

  • If any defect is found, replace the drive belt.
  • Cracks on the rib side of a belt are considered acceptable.

    If the belt has chunks missing from the ribs, it should be replaced.

(b) Check that it fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the belt has not slipped out of the groove on the bottom of the pulley.