- Position sensor power source circuit
- Actuator power source circuit
- Telescopic motor circuit
- Tilt and telescopic ECU
| Last Modified: 4-30-2014 | 6.6 C | Doc ID: RM000000XZA007X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: B2611; Telescopic Position Sensor or Telescopic Motor Circuit Malfunction; 2006 MY LX470 [05/2005 - ] | ||
|
DTC |
B2611 |
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction |
DESCRIPTION
The telescopic motor is operated by the power source voltage supplied from the tilt and telescopic ECU and makes the steering column slide forward and rearward. The telescopic position sensor (Hall IC) in the telescopic motor detects the sliding position of the forward and rearward direction of the steering column and outputs the signal to the CPU in response to that sliding amount.
HINT:
Limit positions can be confirmed on the screen of the intelligent tester.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B2611 |
Within telescopic motor operation range, motor deceleration is detected and motor stops. |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK POSITION SENSOR POWER SOURCE CIRCUIT |
(a)
Check the position sensor power source circuit
![2006 MY LX470 [05/2005 - ]; STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: Position Sensor Power Source Circuit](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: Position Sensor Power Source Circuit")
.
| NG |
|
|
|
2. |
CHECK ACTUATOR POWER SOURCE CIRCUIT |
(a)
Check the actuator power source circuit
.
| NG |
|
|
|
3. |
CHECK TELESCOPIC MOTOR CIRCUIT |
(a)
Check the telescopic motor circuit
.
| NG |
|
| OK |
|
|
|