|
1. INSPECT TRANSMISSION WIRE
(a) Disconnect the E1 ATF temperature sensor connector from the transmission.
(b) Measure the resistance of the temperature sensor.
Standard resistance:
|
Tester Connection
|
Specified Condition
|
|
2 (OT-) - 10 (OT+)
|
79 Ω to 156 kΩ
|
|
2 (OT-) - Body ground
|
1 MΩ or higher
|
|
10 (OT+) - Body ground
|
1 MΩ or higher
|
HINT:
If the resistance is out of the specified range of either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.
Standard resistance:
|
ATF Temperature
|
Specified Condition
|
|
20°C (68°F)
|
3 to 4 kΩ
|
|
110°C (230°F)
|
0.22 to 0.28 kΩ
|
|