| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000017FN002X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: INSTALLATION; 2006 MY LX470 [05/2005 - ] | ||
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
|
(a) Install the camshaft position sensor with the bolt and stud bolt. Torque: 7.5 N·m {76 kgf·cm, 66in·lbf} |
|
2.
INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY BANK 1
![2006 MY LX470 [05/2005 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: INSTALLATION+](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: INSTALLATION+")
3.
CONNECT NO. 1 RADIATOR HOSE
4.
INSTALL INTAKE AIR CONNECTOR PIPE
5.
INSTALL V-BANK COVER SUB-ASSEMBLY
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
8.
ADD ENGINE COOLANT
9. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
|
|