Last Modified: 4-30-2014 6.6 G Doc ID: RM0000017FS002X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: 2UZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSPECTION; 2006 MY LX470 [05/2005 -        ]

INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR

(a) Measure the resistance between the terminals.

Standard resistance:

Temperature

Specified Condition

Cold

1,630 to 2,740 Ω

Hot

2,065 to 3,225 Ω

NOTICE:

In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

If the result is not as specified, replace the sensor.