| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000017G4002X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: INSTALLATION; 2006 MY LX470 [05/2005 - ] | ||
INSTALLATION
1. INSTALL KNOCK CONTROL SENSOR
|
(a) Install the 2 knock sensors with the 2 nuts, as shown in the illustration. Torque: 20 N·m {204 kgf·cm, 15ft·lbf} |
|
(b) Connect the 2 knock sensor connectors.
2.
INSTALL AIR PUMP ASSEMBLY
![2006 MY LX470 [05/2005 - ]; 2UZ-FE EMISSION CONTROL: AIR PUMP: INSTALLATION+](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; 2UZ-FE EMISSION CONTROL: AIR PUMP: INSTALLATION+")
3.
INSTALL INTAKE MANIFOLD ASSEMBLY
4.
CONNECT FUEL MAIN HOSE
5.
CONNECT FUEL RETURN HOSE
6.
INSTALL INTAKE AIR CONNECTOR PIPE
7.
INSTALL V-BANK COVER SUB-ASSEMBLY
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
10.
ADD ENGINE COOLANT
11. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
12. CHECK FOR FUEL LEAKS
(a)
Check for fuel leaks
.
|
|