2UZ-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL; 2006 MY LX470 [05/2005

Last Modified: 4-30-2014	6.6 A	Doc ID: RM0000017GG002X
Model Year: 2006	Model: LX470	Prod Date Range: [05/2005 - ]
Title: 2UZ-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL; 2006 MY LX470 [05/2005 - ]

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE GLOVE BOX COMPARTMENT DOOR

(a) Remove the 2 screws and glove compartment door.

3. REMOVE NO. 2 FINISH PANEL LOWER

(a) Remove the 3 screws and No. 2 finish panel lower.

4. REMOVE ECM ASSEMBLY

(a) Disconnect the 5 ECM connectors.

(b) Remove the 3 screws and ECM.