| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000017SH002X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: REMOVAL; 2006 MY LX470 [05/2005 - ] | ||
REMOVAL
CAUTION:
- Wear protective gloves when removing the sensor.
- The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe assembly has cooled down before removing it.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
|
(a) Disconnect the sensor connector. |
|
(b) Using SST, remove the sensor.
SST: 09224-00010
3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
|
(a) Disconnect the sensor connector. |
|
(b) Using SST, remove the sensor.
SST: 09224-00010
|
|