| Last Modified: 4-30-2014 | 6.6 G | Doc ID: RM0000017SI002X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: ON-VEHICLE INSPECTION; 2006 MY LX470 [05/2005 - ] | ||
ON-VEHICLE INSPECTION
1. CHECK HEATED OXYGEN SENSOR
|
(a) Disconnect the sensor connector. |
|
(b) Measure the heater resistance between terminals 1 (HT) and 2 (+B) of the sensor.
Standard resistance:
11 to 16 Ω at 20°C (68°F)
If the result is not as specified, replace the sensor.
|
|