| Last Modified: 4-30-2014 | 6.6 G | Doc ID: RM0000017XD002X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE EMISSION CONTROL: AIR PUMP: INSPECTION; 2006 MY LX470 [05/2005 - ] | ||
INSPECTION
1. INSPECT AIR PUMP
|
(a) Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check that air flows. If operation is not as specified, replace the air pump. |
|
2. INSPECT AIR SWITCHING VALVE
|
(a) Blow air into port A and check that air is not discharged from port B. |
|
|
(b) Apply battery voltage across the terminals. |
|
(c) Blow air into port A and check that air is discharged from port B.
If operation is not as specified, replace the air switching valve.
3. INSPECT NO. 2 AIR SWITCHING VALVE
|
(a) Blow air into port B and check that air is not discharged from port C. |
|
|
(b) Apply vacuum of 30 kPa (306 gf/cm 2 , 4.35 psi) to port A, blow air into port B and check that air is discharged from port C. If operation is not as specified, replace the No. 2 air switching valve. |
|
|
|