Last Modified: 4-30-2014 6.6 A Doc ID: RM0000018D2001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: HF2A TRANSFER: INPUT SHAFT: REASSEMBLY; 2006 MY LX470 [05/2005 -        ]

REASSEMBLY

HINT:

Coat all of the sliding and rotating surfaces with gear oil before reassembly.

1. INSTALL FRONT BALL BEARING

(a) Using SST and a press, press in a new ball bearing.

SST: 09316-60011

09316-00011

(b) Select a snap ring that will allow the minimum axial play.

Standard snap ring thickness:

Mark

Thickness mm (in.)

Mark

Thickness mm (in.)

A

2.90 (0.1141)

D

3.05 (0.1201)

B

2.95 (0.1161)

E

3.10 (0.1220)

C

3.00 (0.1181)

F

3.15 (0.1240)

(c) Using a snap ring expander, install a new snap ring.

2. INSTALL REAR BALL BEARING

(a) Using SST and a press, press in a new ball bearing.

SST: 09316-60011

09316-00011

09316-00031

(b) Select a snap ring that will allow the minimum axial play.

Standard snap ring thickness:

Mark

Thickness mm (in.)

Mark

Thickness mm (in.)

A

2.00 (0.0787)

D

2.30 (0.0906)

B

2.10 (0.0827)

E

2.40 (0.0945)

C

2.20 (0.0866)

-

-

(c) Using a snap ring expander, install a new snap ring.