| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000018D5001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: HF2A TRANSFER: IDLER GEAR: REASSEMBLY; 2006 MY LX470 [05/2005 - ] | ||
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before reassembly.
|
1. INSTALL FRONT TAPER ROLLER BEARING (a) Using SST and a press, press in the taper roller bearing. SST: 09316-60011 09316-00011 09316-00031 |
|
|
2. INSTALL HIGH AND LOW CLUTCH SLEEVE (a) Install the high and low clutch sleeve to the idler gear. HINT: Make sure to install the high and low clutch sleeve in the correct direction. |
|
|
3. INSTALL NEEDLE ROLLER BEARING AND IDLER LOW GEAR (a) Apply gear oil to the needle roller bearing. (b) Install the needle roller bearing and idler low gear to the idler gear. |
|
|
4. INSTALL REAR TAPER ROLLER BEARING (a) Using SST and a press, press in the taper roller bearing. SST: 09316-60011 09316-00011 09316-00071 |
|
5.
CHECK IDLER LOW GEAR RADIAL AND THRUST CLEARANCE
![2006 MY LX470 [05/2005 - ]; HF2A TRANSFER: IDLER GEAR: DISASSEMBLY+](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; HF2A TRANSFER: IDLER GEAR: DISASSEMBLY+")
|
|