Last Modified: 4-30-2014 6.6 G Doc ID: RM0000018JM001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: HF2A TRANSFER: IDLER GEAR: INSPECTION; 2006 MY LX470 [05/2005 -        ]

INSPECTION

1. INSPECT IDLER GEAR

(a) Using a micrometer, measure the idler gear diameter.

Standard diameter:

38.48 to 38.50 mm (1.5149 to 1.5157 in.)

Maximum diameter:

38.50 mm (1.5157 in.)

If the diameter is greater than the maximum, replace the idler gear.

2. INSPECT IDLER LOW GEAR

(a) Using a caliper gauge, measure the idler low gear diameter.

Standard diameter:

45.52 to 45.54 mm (1.7922 to 1.7930 in.)

Maximum diameter:

45.54 mm (1.7930 in.)

If the diameter is greater than the maximum, replace the idler low gear.