| Last Modified: 4-30-2014 | 6.6 T | Doc ID: RM0000018L0001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: PROBLEM SYMPTOMS TABLE; 2006 MY LX470 [05/2005 - ] | ||
PROBLEM SYMPTOMS TABLE
TIRE PRESSURE WARNING SYSTEM
|
Symptom |
Suspected area |
See page |
|---|---|---|
|
Tire pressure warning system does not operate. |
1. Tire pressure monitor valve sub-assembly |
|
|
2. Tire pressure antenna |
|
|
|
3. Power source circuit |
|
|
|
4. TC and CG terminal circuit |
|
|
|
5. Combination meter assembly |
|
|
|
6. Tire pressure monitor ECU |
|
|
|
DTC check cannot be completed. |
1. Power source circuit |
|
|
2. TC and CG terminal circuit |
|
|
|
3. Tire pressure monitor ECU |
|
|
|
Tire pressure warning light malfunctions (Does not light up). |
1. Power source circuit |
|
|
2. Tire pressure warning light circuit |
|
|
|
3. Combination meter assembly |
|
|
|
4. Tire pressure monitor ECU |
|
|
|
Tire pressure warning light malfunctions (Remains on). |
1. Tire pressure check |
|
|
2. Tire pressure monitor ECU connector poorly connected |
|
|
|
3. Tire pressure warning light circuit |
|
|
|
4. Combination meter assembly |
|
|
|
5. Tire pressure monitor ECU |
|
|
|
Tire pressure warning light malfunctions (Blinking). |
1. Check DTC |
|
|
2. TC and CG terminal circuit |
|
|
|
3. Test mode (SIGNAL CHECK) |
|
|
|
4.Tire pressure monitor ECU |
|
|
|
Initialization cannot be completed. |
1 Test mode (SIGNAL CHECK) |
|
|
2. Tire pressure warning reset switch |
|
|
|
3. Tire pressure monitor ECU |
|
|
|
Cannot be switched between "MAIN" and "2nd" |
1. Tire pressure warning select switch |
|
|
2. Wire harness |
|
|
|
3. Tire pressure monitor ECU |
|
![2006 MY LX470 [05/2005 - ]; TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2111/11-C2115/15; Transmitter ID1 Operation Stop](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2111/11-C2115/15; Transmitter ID1 Operation Stop")
|
|