Last Modified: 4-30-2014 6.6 A Doc ID: RM0000018RC001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: 2UZ-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION; 2006 MY LX470 [05/2005 -        ]

INSTALLATION

1. INSTALL FUEL PRESSURE REGULATOR

(a) Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.

(b) While turning the pressure regulator left and right, install it to the delivery pipe.

(c) Install the pressure regulator with the 2 bolts.

Torque:

7.5 N·m {77 kgf·cm, 66in·lbf}

(d) Connect the fuel return hose to the pressure regulator.

(e) Connect the vacuum sensing hose to the pressure regulator.

2. CHECK FOR FUEL LEAKS 2006 MY LX470 [05/2005 -        ]; 2UZ-FE FUEL: FUEL SYSTEM: ON-VEHICLE INSPECTION+

3. INSTALL V-BANK COVER 2006 MY LX470 [05/2005 -        ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+

4. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization 2006 MY LX470 [05/2005 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.