| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000018RT001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: AXLE: FRONT AXLE HUB: REASSEMBLY; 2006 MY LX470 [05/2005 - ] | ||
REASSEMBLY
|
1. INSTALL FRONT DISC (a) Mount the disc in a soft jaw vise. NOTICE: Close the vise until it holds the disc, and do not tighten it further. (b) Align the matchmarks on the axle hub and disc. (c) Install the 5 bolts to the axle hub. Torque: 74 N·m {750 kgf·cm, 54ft·lbf} |
|
2. INSTALL AXLE HUB BEARING OUTER RACE
(a) Using SST and a hammer, carefully install a new outside bearing outer race.
SST: 09950-60020
09951-00730
SST: 09950-70010
09951-07100
|
(b) Using SST and a hammer, carefully install a new inside bearing outer race. SST: 09950-60020 09951-00890 SST: 09950-70010 09951-07100 NOTICE: Be careful not to damage the ABS speed sensor rotor. |
|
|
3. PACK AXLE HUB BEARING WITH MP GREASE (a) Place MP grease in the palm of your hand. (b) Pack grease into a new bearing, continuing until the grease oozes out from the other side. (c) Employ the same manner around the bearing circumference. |
|
|
4. COAT INSIDE OF AXLE HUB WITH MP GREASE |
|
5. INSTALL FRONT AXLE HUB INNER BEARING
(a) Place the inner bearing into the axle hub.
|
6. INSTALL FRONT AXLE HUB OIL SEAL (a) Using SST and a hammer, tap in a new oil seal into the axle hub. SST: 09950-60020 09951-01030 SST: 09950-70010 09951-07100 NOTICE: Be careful not to damage the ABS speed sensor rotor. (b) Coat the lip of the oil seal with MP grease. |
|
|
|