| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM0000018S1001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: AXLE: STEERING KNUCKLE: REASSEMBLY; 2006 MY LX470 [05/2005 - ] | ||
REASSEMBLY
|
1. INSTALL STEERING KNUCKLE BUSH (a) Using SST and a press, press in a new bearing and bushing. SST: 09950-60010 09951-00540 SST: 09950-70010 09951-07100 (b) Apply synthetic oil and lithium soap base chassis grease (NLGI No. 1) to the steering knuckle inner side of the bushing. |
|
|
2. INSTALL STEERING KNUCKLE OIL SEAL (a) Using SST and a press, tap in a new oil seal. SST: 09950-60020 09951-00910 SST: 09950-70010 09951-07100 (b) Coat the lip of the oil seal with MP grease. |
|
3. INSTALL STEERING KNUCKLE ARM
(a) Clean the threads of the 2 bolts and steering knuckle with toluene or trichloroethylene.
(b) Apply sealant to the bolt threads.
Sealant:
Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent
(c) Install the steering knuckle arm with the 2 bolts.
Torque:
147 N·m {1,500 kgf·cm, 108ft·lbf}
|
|