Last Modified: 4-30-2014 6.6 A Doc ID: RM0000018S2001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: AXLE: REAR AXLE SHAFT: INSTALLATION; 2006 MY LX470 [05/2005 -        ]

INSTALLATION

HINT:

  • The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included 2006 MY LX470 [05/2005 -        ]; AXLE: REAR AXLE SHAFT: REMOVAL .
  • After installation, fill the brake reservoir with brake fluid, bleed the brake system 2006 MY LX470 [05/2005 -        ]; BRAKE: BRAKE FLUID: BLEEDING , check for leaks and check the ABS speed sensor signal 2006 MY LX470 [05/2005 -        ]; BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: DIAGNOSIS SYSTEM .

1. INSTALL REAR AXLE SHAFT OIL SEAL

(a) Using SST and a hammer, tap in a new oil seal.

SST: 09950-60020

09951-00710

SST: 09950-70010

09951-07150

(b) Coat MP grease to the oil seal lip.