Last Modified: 4-30-2014 6.6 D Doc ID: RM0000018ZJ000X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2006 MY LX470 [05/2005 -        ]

HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

  • Use these procedures to troubleshoot the meter / gauge system.
  • *: Use the intelligent tester.

1.

VEHICLE BROUGHT TO WORKSHOP
NEXT

2.

INSPECT BATTERY VOLTAGE

Standard voltage:

10 to 14 V

If the voltage is below 11 V, recharge or replace battery before proceeding.

NEXT

3.

CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
NEXT

4.

INSPECT COMMUNICATION FUNCTION LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAM)*

(a) Use the intelligent tester to check if the Multiplex Communication System (MPX) is functioning normally.

Result

Result

Proceed to

MPX DTC is not output

A

MPX DTC is output

B
B

Go to step 7
A

5.

PROBLEM SYMPTOMS TABLE

Result

Result

Proceed to

If fault is not listed in problem symptoms table

A

If fault is listed in problem symptoms table

B
B

Go to step 7
A

6.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU 2006 MY LX470 [05/2005 -        ]; METER: METER / GAUGE SYSTEM: TERMINALS OF ECU

(b) DATA LIST / ACTIVE TEST 2006 MY LX470 [05/2005 -        ]; METER: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST

(c) On-vehicle Inspection 2006 MY LX470 [05/2005 -        ]; METER: METER / GAUGE SYSTEM: ON-VEHICLE INSPECTION

NEXT

7.

REPAIR OR REPLACE
NEXT

8.

CONFIRMATION TEST
NEXT

END