| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM00000195F000X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: WINDSHIELD / WINDOWGLASS: QUARTER WINDOW GLASS: REMOVAL; 2006 MY LX470 [05/2005 - ] | ||
REMOVAL
HINT:
Use the same procedures for the RH side and LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE ROOF HEADLINING REAR TRIM
|
(a) Using a screwdriver, remove the trim. HINT: Tape the screwdriver tip before use. |
|
3. REMOVE REAR NO. 2 SEAT
(a)
Remove the rear No. 2 seat
![2006 MY LX470 [05/2005 - ]; SEAT: REAR NO. 2 SEAT ASSEMBLY: DISASSEMBLY](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; SEAT: REAR NO. 2 SEAT ASSEMBLY: DISASSEMBLY")
.
|
4. REMOVE REAR MAT SET PLATE (a) Remove the 5 screws. (b) Using a screwdriver, remove the set plate. HINT: Tape the screwdriver tip before use. |
|
5.
REMOVE REAR NO. 3 SEAT PROTECTOR
6. REMOVE FRONT NO. 3 SEAT BRACKET COVER
(a) Remove the 2 screws and 2 bracket covers.
7. REMOVE NO. 3 SEAT BRACKET SUPPORT COVER
(a) Remove the 2 covers.
8. REMOVE REAR FLOOR CARPET
9. REMOVE REAR NO. 2 SEAT OUTER BELT FLOOR ANCHOR
10. REMOVE REAR NO. 1 SEAT OUTER BELT FLOOR ANCHOR
11. REMOVE REAR DOOR SCUFF PLATE
12. REMOVE REAR DOOR OPENING TRIM
|
13. REMOVE QUARTER TRIM PANEL (a) Remove the quarter trim jack cover. (b) Using a clip remover, remove the 2 clips. (c) Remove the trim panel, and then disconnect the connector. |
|
14. REMOVE REAR NO. 2 SEAT OUTER BELT SHOULDER ANCHOR
15. REMOVE REAR NO. 1 SEAT OUTER BELT SHOULDER ANCHOR
|
16. REMOVE UPPER ROOF SIDE INNER GARNISH (a) Using a screwdriver, remove the 2 assist grip plugs, and then remove the 2 screws and assist grip. HINT: Tape the screwdriver tip before use. (b) Using a clip remover, remove the clip. (c) Using a screwdriver, remove the garnish. HINT: Tape the screwdriver tip before use. |
|
|
17. REMOVE QUARTER WINDOW GLASS (a) Disconnect the connector. (b) Remove the 2 bolts. (c) Remove the 2 nuts and window glass. |
|
18. REMOVE QUARTER WINDOW WEATHERSTRIP
|
19. REMOVE QUARTER BELT MOULDING (a) Remove the screw. (b) Using a screwdriver, remove the moulding. HINT: Tape the screwdriver tip before use. |
|
|
20. REMOVE REAR QUARTER WINDOW MOTOR (a) Remove the screw and window motor. |
|
21. REMOVE QUARTER WINDOW LOCK
(a) Remove the screw and window lock.
|
|