Last Modified: 4-30-2014 6.6 A Doc ID: RM000001970001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: EXTERIOR: ROOF DRIP SIDE FINISH MOULDING: INSTALLATION; 2006 MY LX470 [05/2005 -        ]

INSTALLATION

NOTICE:

Do not heat the clip and vehicle body excessively.

HINT:

  • Use the same procedures for the RH side and LH side.
  • The procedures listed below are for the LH side.
  • When installing the clip, heat the clip and vehicle body using a heat light.

    Standard heating temperature:

    Item

    Temperature

    Clip

    20 to 30°C (68 to 86°F)

    Vehicle Body

    40 to 60°C (104 to 140°F)

1. INSTALL NO. 2 ROOF DRIP SIDE FINISH MOULDING CLIP

If the No. 2 roof drip side finish moulding clip is accidentally removed:

(a) Using a heat light, heat the body mounting surface.

NOTICE:

Do not heat the vehicle body excessively.

(b) Remove the adhesive tape and adhesive from the body.

(c) Wipe off any tape adhesive residue with cleaner.

(d) Using a heat light, heat the body and clip.

NOTICE:

Do not heat the vehicle body and clip excessively.

(e) Install the clip.

2. REMOVE NO. 2 ROOF DRIP SIDE FINISH MOULDING CENTER LH

(a) Install the 3 finish moulding centers to the roof drip side finish moulding.

3. INSTALL ROOF DRIP SIDE FINISH MOULDING LH