| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM000001AEO001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: SUSPENSION: REAR UPPER CONTROL ARM: REMOVAL; 2006 MY LX470 [05/2005 - ] | ||
REMOVAL
1. REMOVE REAR WHEEL
Torque:
131 N·m {1,340 kgf·cm, 97ft·lbf}
2. SUPPORT REAR AXLE HOUSING WITH JACK
|
3. REMOVE REAR HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY (a) LH side: (1) Place matchmarks on the height control sensor link and upper control arm. (2) Remove the nut and disconnect the height control sensor link. Torque: 5.6 N·m {57 kgf·cm, 49in·lbf} |
|
4. REMOVE UPPER CONTROL ARM ASSEMBLY
(a) Disconnect the ABS speed sensor wire harness.
(b) RH side:
(1) Remove the bolt and heat insulator.
Torque:
18 N·m {185 kgf·cm, 13ft·lbf}
|
(c) Remove the 2 nuts, washers, bolts and upper control arm. Torque: 150 N·m {1,530 kgf·cm, 111ft·lbf} HINT: At the time of installation, please refer to the follow items.
|
|
|
|