| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM000001AEU001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: SUSPENSION: REAR STABILIZER BAR: REMOVAL; 2006 MY LX470 [05/2005 - ] | ||
REMOVAL
1. REMOVE REAR WHEEL
Torque:
131 N·m {1,340 kgf·cm, 97ft·lbf}
2. SUPPORT REAR AXLE HOUSING WITH JACK
|
3. DISCONNECT REAR STABILIZER BRACKET (a) Remove the 4 bolts and disconnect the 2 stabilizer bar brackets. Torque: 18 N·m {185 kgf·cm, 13ft·lbf} |
|
|
4. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY (a) Remove the 4 bolts and stabilizer bar with the bush and brackets. Torque: 18 N·m {185 kgf·cm, 13ft·lbf} (b) Remove the 2 brackets and 2 bushings from the stabilizer bar. |
|
5. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a) Remove the nut, 3 retainers and 2 cushions, and disconnect the stabilizer bar link from the bracket.
Torque:
15 N·m {150 kgf·cm, 11ft·lbf}
HINT:
At the time of installation, replace the 2 used nuts with new ones.
(b) Remove the nut, bolt and stabilizer bar link.
Torque:
26 N·m {270 kgf·cm, 19ft·lbf}
(c) Remove the collar and cushion.
6. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
|
|