Last Modified: 4-30-2014 6.6 A Doc ID: RM000001B2G002X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: BRAKE CONTROL: REAR SPEED SENSOR: REMOVAL; 2006 MY LX470 [05/2005 -        ]

REMOVAL

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR WHEEL

3. REMOVE REAR SPEED SENSOR LH

(a) Disconnect the speed sensor connector.

(b) Remove the clamp bolt from the upper control bracket.

(c) Remove the 6 resin clips holding the sensor wire harness to the frame, upper control arm and axle housing.

(d) Remove the bolt and speed sensor.

NOTICE:

Keep the sensor tip and sensor installation hole free from foreign matter.