Last Modified: 4-30-2014 6.6 A Doc ID: RM000001B2J001X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: BRAKE CONTROL: FRONT SPEED SENSOR: REMOVAL; 2006 MY LX470 [05/2005 -        ]

REMOVAL

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT WHEEL

3. REMOVE FRONT SPEED SENSOR LH

(a) Disconnect the speed sensor connector.

(b) Remove the resin clip and 4 clamp bolts holding the sensor harness from the steering knuckle and upper arm.

(c) Remove the bolt and speed sensor to the steering knuckle.

NOTICE:

Keep the sensor tip and sensor installation hole free from foreign matter.