Last Modified: 4-30-2014 6.6 A Doc ID: RM000001BGG000X
Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEM: STEERING PAD: INSTALLATION; 2006 MY LX470 [05/2005 -        ]

INSTALLATION

NOTICE:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing 2006 MY LX470 [05/2005 - 01/2006]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PRECAUTION .

1. INSTALL STEERING PAD ASSEMBLY

(a) Support the steering pad with one hand as shown in the illustration.

(b) Connect the 2 airbag connectors.

NOTICE:

When handling the airbag connector, do not damage the airbag wire harness.

(c) Connect the horn connector.

(d) Install the steering pad after confirming that the circumference grooves of the screws are caught on the screw case.

(e) Using a T30 "torx" socket, install the 2 screws.

Torque:

8.8 N·m {90 kgf·cm, 78in·lbf}

(f) Install the steering wheel lower covers.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSPECT STEERING PAD ASSEMBLY

4. PERFORM INITIALIZATION

(a) Perform initialization 2006 MY LX470 [05/2005 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light 2006 MY LX470 [05/2005 - 01/2006]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PRECAUTION .