|
Last Modified: 4-30-2014 |
6.6 A |
Doc ID: RM000001BGJ000X |
|
Model Year: 2006 |
Model: LX470 |
Prod Date Range: [05/2005 -
] |
|
Title:
SUPPLEMENTAL RESTRAINT SYSTEM: STEERING PAD: REMOVAL; 2006 MY LX470 [05/2005 - ]
|
REMOVAL
CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing
.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE STEERING PAD ASSEMBLY
(a) Straighten the front wheels.
(b) Remove the steering wheel lower covers.
(c) Using a T30 "torx" socket, loosen the 2 screws until the groove along each screw circumference catches on the screw case.
|
(d) Pull out the steering pad from the steering wheel and support the steering pad with one hand as shown in the illustration.
NOTICE:
When removing the steering pad, do not pull the airbag wire harness.
|
|
(e) Using a screwdriver, disconnect the 2 airbag connectors.
CAUTION:
When handling the airbag connector, do not damage the airbag wire harness.
(f) Disconnect the horn connector and remove the steering pad.
|